Our Iron-On DTF Transfers are printed using the advanced Direct to Film (DTF) method and feature a heat-activated adhesive for a strong, long-lasting bond to various fabrics. Each transfer comes with a masking layer on the front; once pressed with heat, this mask is peeled away, leaving a vibrant and durable print.

APPLICATION INSTRUCTION

1. Position Your Design

  • Make sure the garment you’re applying the transfer to is smooth and wrinkle-free.
  • Place the Iron-on DTF Transfer on the garment with the design facing up.
  • Place heat-resistant parchment paper on top of your iron-on transfer before applying heat to prevent scorching and shifting (optional).

2. Apply Heat

  • You can use either household iron or heat press, set to 310°F (155°C) and press for 20-30 seconds with medium pressure.
  • NOTE: It’s a good idea if you have a sample to test first before proceeding with your Iron-on DTF Transfer.

3. Peel the Film

  • Wait 15-20 seconds for your Iron-on Transfer to cool down, then peel the film (the masking layer) off.
  • If any part of the design doesn’t stick to the garment, lay the film back down and apply heat again for a few extra seconds.

4. Final Press for Durability

  • Cover the design with parchment paper and press again for 15-20 seconds to enhance adhesion.

Watch a video demonstrating how to properly apply Iron-on DTF Transfers on your item:

CARE INSTRUCTION

  • Wash garments inside out in cold water for best longevity.
  • Tumble dry on low heat or hang dry.
  • Avoid bleach and fabric softeners to preserve vibrancy.

For more custom printing products, go to our website: customany.com.