Applying UV DTF transfer stickers takes just a few simple steps, from separating the layers to pressing the design onto your surface. Let’s learn how to do it right:

Our UV DTF Transfer Stickers are made using the advanced UV Direct to Film (DTF) printing method and UV-curable ink. They boast a unique 3-layer structure: the backing layer, the sticker layer, and the transfer tape layer.

SEPARATE LAYERS

To easily separate the layers, you should fold the corner of the transfer stickers. You can watch instructional video here.

APPLY STICKERS

  1. Flip the sticker face down and use a credit card or your hand to firmly rub it onto the backing layer and then slowly peel the backing layer away.
  2. Choose the position where you want to apply the sticker, place the sticker layer and the transfer tape layer on your desired surface for application.
  3. Use a credit card or your hand again to apply pressure to the entire design to make sure it’s fully adhered.
  4. Wait about one minute for the adhesive to bond firmly to the surface. Then slowly peel the transfer tape away at a 180-degree angle, leaving only the sticker layer adhered
    to your desired surface.

While doing that, if the sticker layer is still stuck to the transfer tape layer, place it back, rub the transfer tape layer again to ensure the sticker layer adhere firmly to the surface before completely peeling the transfer tape layer off.

Watch a video demonstrating how to properly apply stickers on your item via this link.

For more custom stickers and labels, go to our website: customany.com.